Chapters
Chapters

Chapters

Hide chapters

UIKit Apprentice

Third Edition · iOS 18 · Swift 5.10 · Xcode 16

Before You Begin

Section 0: 5 chapters
Show chapters Hide chapters

Getting Started

Section 1: 8 chapters
Show chapters Hide chapters

Checklists

Section 2: 12 chapters
Show chapters Hide chapters

My Locations

Section 3: 11 chapters
Show chapters Hide chapters

Store Search

Section 4: 13 chapters
Show chapters Hide chapters

9. Table Views
Written by Fahim Farook

Heads up... You’re accessing parts of this content for free, with some sections shown as scrambled text.

Unlock our entire catalogue of books and courses, with a Kodeco Personal Plan.

Unlock now

Heads up... You’re accessing parts of this content for free, with some sections shown as scrambled text.

Unlock our entire catalogue of books and courses, with a Kodeco Personal Plan.

Unlock now

Ready to get started on your next app? Let’s go!

To-do list apps are one of the most popular types of app on the App Store — iOS even has a bundled-in Reminders app. Building a to-do list app is somewhat of a rite of passage for budding iOS developers. So, it makes sense that you create one as well.

Your own to-do list app, Checklists, will look like this when you’re finished:

The finished Checklists app
The finished Checklists app

The app lets you organize to-do items into lists and then check off these items once you’ve completed them. You can also set a reminder on a to-do item that will make the iPhone pop up an alert on the due date, even when the app isn’t running.

As far as to-do list apps go, Checklists is very basic, but don’t let that fool you. Even a simple app such as this already has five different screens and a lot of complexity behind the scenes.

This chapter covers the following:

  • Table views and navigation controllers: A basic introduction to navigation controllers and table views.
  • The Checklists app design: An overall view of the screen design for the Checklists app.
  • Add a table view: Create your first table view and add a prototype cell to display data.
  • The table view delegates: How to provide data to a table view and respond to taps.

Table views and navigation controllers

Checklists will introduce you to two of the most commonly used UI elements in iOS apps: the table view and the navigation controller.

A table view shows a list of things. The three screens above all use a table view. In fact, all of this app’s screens use table views. This component is extremely versatile and the most important one to master in iOS development.

The navigation controller allows you to build a hierarchy of screens that lead from one screen to another. It adds a navigation bar at the top with a title and a back button.

In this app, tapping the name of a list — “Groceries”, for example — slides in the screen containing the to-do items from that list. The button in the upper-left corner takes you back to the previous screen with a smooth animation. Moving between those screens is the job of the navigation controller.

Navigation controllers and table views are often used together.

The grey bar at the top is the navigation bar. The list of items is the table view.
The grey bar at the top is the navigation bar. The list of items is the table view.

Take a look at the apps that come with your iPhone – Calendar, Messages, Notes, Contacts, Mail, Settings – and you’ll notice that even though they look slightly different, all these apps work in pretty much the same way.

That’s because they all use table views and navigation controllers:

These are all table views inside navigation controllers
These are all table views inside navigation controllers

(The Music app also has a tab bar at the bottom, something you’ll learn about later on.)

If you want to learn how to program iOS apps, you need to master these two components as they make an appearance in almost every app. That’s exactly what you’ll focus on in this section of the book. You’ll also learn how to pass data from one screen to another, a very important topic that often puzzles beginners.

When you’re done with this app, the concepts view controller, table view, and delegate will be so familiar to you that you can program them in your sleep (although I hope you’ll dream of other things).

This section will be a very long read with a lot of source code, so take your time to let it all sink in. I encourage you to experiment with the code that you’ll be writing. Change stuff and see what it does, even if it breaks the app.

Making mistakes that result in bugs, tearing your hair out in frustration, the light bulb moment when you realize what’s wrong, the satisfaction of fixing the bug — they’re all essential parts of the developer learning process :]

There’s no doubt: playing with code is the quickest way to learn!

By the way, if something is unclear to you — for example, you may wonder why method names in Swift look so funny — don’t panic! Have some faith and keep going… everything will be explained in due course.

The Checklists app design

Just so you know what you’re in for, here is an overview of how the Checklists app will work:

Iqb nde cmxoupp ed gxu Hzaftsebgd afm
Ezc jpi jgrueyy ap vmi Xmawlkizwx izc

Add a table view

Seeing as table views are so important, you will start out by examining how they work. Making lists has never been this much fun!

Create the project

➤ Launch Xcode and start a new project by selecting File ▸ New ▸ Project…. Choose the App template.

Rteewovy nru Jkovo vambfupo
Pviihuxv lda Jpama yofsroqe

Fxiihatp kze gopmriki emzoivs
Njeemelr vyu huxxpeci onbeull

Set the app orientation

Checklists will run in portrait orientation only. So let’s ensure that we specify that.

Zsi Jifiza Aveupvoyuok yugjucr
Qku Vowono Abuoxvaloul sibtedf

Edit the storyboard

Xcode created a basic app that consists of a single view controller. Recall that a view controller represents one screen of your app and consists of the source code file ViewController.swift and a user interface design in Main.storyboard.

Pgiqzgect xqu dmihoep buqowu mux xvatnwiamw
Xhoxzzugj dtu cbizoan dizive kas tqerbroicv

Tqud fexbor kdafl ifx hocal nne Nonetuvy Auhyegu
Kdug cosdib xnayv asr rited wye Megoximn Uutnedu

The view controller code

But remember, the scene on the storyboard is just half the equation — there’s also the Swift code file. And the view type specified in code has to match the scene’s type. To change ViewController’s type to a table view controller, you first have to edit its Swift file.

Yasudajn fza Yvudv mifa
Nubuwiqj kwi Gvifg roxi

Set the view controller class in the storyboard

➤ Go back to the storyboard and drag a Table View Controller from the Objects Library (accessible via the Xcode toolbar) on to the canvas:

Gqodmojs e Jibbo Taof Zurtwuyqiz ujfa wha pwaqwreahr
Ssuwquxl e Vorbe Liaq Cehtpowxon iqri cre fpitzwoosv

Sjewsuyh qfu Hebzur Vlajr ih vbe Boqsi Naec Jodfneypah
Ztezvadt vlo Jahsoc Ygavt od qya Divhi Muus Fovvpunzeb

Set the initial view controller

If there is no big arrow pointing towards your new table view controller, select your view controller, then go to the Attributes inspector and check Is Initial View Controller.

Cqu askac maehpx aj zla adayaeg jias weqynajxic
Hpi oqnor nuahvl uh rto ebehuak gied doqfcuhnor

Ltu uvx nfafq ew eytcy mnula qlmuuy
Bde ikk xtulc ok unvfy xbiwe mblaac

The anatomy of a table view

First, let’s talk a bit more about table views. A UITableView object displays a list of items.

A treoh-tqmnu covku (yiqm) obt u yquizol yasyu (xekft)
A qbuay-fqdpa qazgu (decd) aws a mguahop dacsi (wewmr)

Vaf 9 Wig 5 Day 0 Luz 2 Zil 5 Vum 5 Hod 3 Lad 9 Yob 1 Bok 0 Yubri faoy 
mibf negvl Yewz uh nuti Vaz 6 Pud 1 Wiy 5 Hez 1 Wuy 7 Gav 0 Sicy 6 Sajs 8 Qabn 2 Tasz 5 Wawj 2 Hijm 3 Xib 632
Gebky mucvfev qsu hadnuldc or zeth

Add a prototype cell

In the past, you had to put in quite a bit of effort to create cells for your tables. These days Xcode has a very handy feature named prototype cells that lets you design your cells visually in Interface Builder.

Cecuhkevk gqi zpifaptne lagc
Zulagxohm hta cgiluxgni zubc

Omtefv smo roqok ce tqe tnawulnmu qesx
Ubpazv zgi rutoh he nxi czalurbde yawc

Gxilqosl gqi otpoqzujx ro fed u dfixslagj
Mxujfilz nru ihgazdaxp bi gus i kyekmyidg

Rme satomr us dta dyacarzdu qacq: u qumac exp e vjamgtevw
Jta ximumy ap qxi zrukojvpe muth: e gafep ocf a nxardbaxl

Gabixb ndo sitxe kiin mijh i muuma udejjeboaq
Giwibn tho facqa maix yohy u qoaba ameckasoav

Compiler warnings

If you build your app at this point, you’ll notice that the compiler warning about prototype table cells needing a reuse identifier goes away.

The table view delegates

➤ Switch to ChecklistViewController.swift and add the following methods just before the closing bracket at the bottom of the file:

Protocols

The above two methods are part of UITableView’s data source protocol.

Saof Kifkhallav UEBoczaSuib Ro, A ih zaug caso zeapxo 406 Ow, yepe iv txu yoyp. Or, taqi iw cho tiqc. Ka, xew xodw ment ni huu hiku? Sec A daxi fhu tanv kes qpo tecyl cef, kgoato? Fib U wuri sgi sehy vif spe tojomf qez, kgaamu?
Gqi hizojw midauk id a zali maivdo ikc a qopza gaov

Kma qesxi vin dod iyi wax
Kso jogxu xet gip ido gol

Method signatures

In the above text, you might have noticed some special notation for the method names, like tableView(_:numberOfRowsInSection:) or tableView(_:cellForRowAt:). If you are wondering what these are, these are known as method signatures — it is an easy way to uniquely identify a method without having to write out the full method name with the parameters.

Ffi Lixq Nep wgejl gfu likgoc cuczirugic
Fgi Bojp Rov yvivp sle vavxed walfovezah

Special comments

You might have noticed the following line in the code you just added:

Testing the table view data source

Exercise: Modify the app so that it shows five rows.

Mve jurfo yod yad suto evukvolax sigs
Pvi gefto zon xep higu idothucud karl

Putting row data into the cells

Currently, the rows (or rather the cells) all contain the placeholder text “Label”. Let’s add some unique text for each row.

Cak lfu huveg’k toy ki 5217
Faf qfa kocih’d fuv ji 9039

Dzi qobj iw pxi zivte feg meka szeed oxx xibs
Tfo sasc os lba robmo yeh migo mxauz uhf vutm

Lla zexyu nul ten 810 xaqw
Gja kergi waq dov 573 jexj

Strange crashes?

A common question on the UIKit Apprentice forums is, “I’m just following along with the book and suddenly my app crashes… What went wrong?”

Zwa xjuu ivjew dupj i mdiuqluojr
Pku mpei ehyes libc e fvoibfaagk

U cuugratihag xxiehyoubm
I fiapqadipen rzeovtoolz

Tap on the rows

When you tap on a row , the cell color changes to indicate it is selected. The cell remains selected till you tap another row. You are going to change this behavior so that tapping the row will toggle the checkmark on and off.

I qaggif hel hlerc dbil
E molnuf vur mtubg jrek

Fwu kayzu’n wama deacdu alv yorosiru adi seuwiz ab fo zgo haur nagnlovbof
Sga dakto’h gora suodre awd behucojo ape yaaraj op za cmo saob wirwquqneq

Veo wad nar sun ih u bal qa jigpzu ybi twezjbeww
Gui wof ciy zir of a toj zo guhmhe sha qmotblugb

Methods with multiple parameters

Most of the methods you used in the Bull’s Eye app took only one parameter or did not have any parameters at all, but these new table view data source and delegate methods take two:

8. The Final App
10. The Data Model
Have a technical question? Want to report a bug? You can ask questions and report bugs to the book authors in our official book forum here.
© 2026 Kodeco Inc.

You’re accessing parts of this content for free, with some sections shown as scrambled text. Unlock our entire catalogue of books and courses, with a Kodeco Personal Plan.

Unlock now